Dejond Aerospace Accreditation
07 Jul 2014
Roy Hopwood manufacturing partner Dejond, are pleased to announce that they have evolved from an ISO 9001 to an EN 9100 certified organization.
The accreditation is applicable to the development, production and sales of blind rivet nuts and distribution of high value fastening systems. The EN 9100 certificate will ensure that Dejond are able to meet the most stringent requirements for their aerospace customers, allowing them to strengthen their position in the aerospace industry. It is comparable to the TS 16949 automotive directive.
Congratulations to the Dejond Tubtara team !
Stainless Rivet Nuts From Stock
12 May 2014
Here at Roy Hopwood Fasteners, we have seen an increasing demand for stainless rivet nuts. As the UK manufacturing landscape appears to move towards a more differentiated offer. In order to compete with low cost manufacture around the globe, the use of specialist materials and construction methods has accelerated. A steadily growing demand for 304 stainless steel and 316 stainless steel nutserts was witnessed during the closing stages of 2013.
Working closely with our manufacturing partners Dejond, we are now pleased to announce a stock of 304 stainless blind rivet nuts, and an increasing inventory of 316 stainless products. The range covers M4 to M10 threads and includes thin sheet (low profile), countersunk, and flat head options; as well as both closed and open ended products.
The investment in this stock is a reflection of the demand for products being available with little or no lead time, and we look forward to supplying both new and existing customers with this high quality, European manufactured product line.
Fresh Information on Specialist Blind Rivet Nuts
05 Aug 2013
Dejond have produced a terrific overview of capabilities to provide blind rivet nuts which are outside the normal manufactured options. Marketed under the increasingly recognised Tubtara brand, Dejond have a growing reputation for satisfying the most challenging of blind fastening applications.
Specialising in stainless materials including grades 316 and 304, the Tubtara range is suitable for the most demanding environmental fastener challenges. Products have been designed for use in composite materials; where a large load bearing surface is required. Threaded fixings that allow drainage of liquids are here to see. Rivet nuts that can act as standoffs can be seen, as well as sealed rivet nuts for use in IP rated environments.
To find answers to blind fastening applications that require non standard and innovative solutions, contact Hopwoods by calling 0845 519 6066 or by e-mailing email@example.com
Further Dejond and Tubtara details can be found here….
Dejond Specials Brochure
BBA Bulge Control Technology data sheets
05 Aug 2013
Roy Hopwood Fasteners have developed some useful data sheets for their BBA range of blind rivet nuts which incorporate BCT – Bulge Control Technology.
BCT is a new construction of Rivet Nuts. Four cross holes on the shank control where the bulge starts forming. The Controlled Bulge insures optimal fitting even into holes not perfectly round or irregular or oversized. Because the collapse can be controlled, these blind rivet nuts are particularly suitable for composite materials.The position of these cross holes and the dimensions of the product provide different types of BCT Rivet Nuts.
BBA BCT Multi Grip.
This version gives a grip range of almost three times a Standard Rivet Nuts.
One Rivet Nut is able to cover different grip ranges, typically from 0.5mm up to 6mm. They are ideal for applications in thin materials, as well as brittle and soft materials like plastic and rubber composites. The inventory reduction possibilities are obvious to production and value engineers; a single part number could replace several in current use.
BBA BCT High Strength.
Special material and heat treatment produce a very strong thread, and still the bulge is forming perfectly because of the cross holes. High Tensile BCT can be used for bolts of metric class 12.9 and above without damaging it’s thread.
BBA BCT Short.
the total length of this BCT is substantially reduced to go into applications where the back of the material space is limited, or there is other restricted access. Still this BCT product has a high quality thread according to bolt metric class 8.8 / 10.9.
Finally, there is a useful rivet nut selector tool available by following this link, just find your product and we will do the rest to help you. http://schruff-fasteners.com/main_en.php
For more information on this exciting range of blind rivet nuts, just follow the links under the BBA section of this site.
Hank and Binx products from Hopwoods receive great response from manufacturing industry
10 Jul 2012
Over the last few months Roy Hopwood Fasteners have been introducing the latest addition to their portfolio of fasteners available via an e-marketing and mail shot campaign.
“The campaign has been very well received.” says Fraser Hayden, Sales and Marketing Director. “It not only allows us to inform our customers of this latest edition to our quality portfolio of fasteners, but also introduces new customers to Roy Hopwood Fasteners and the specialist technical support we are able to offer.”
For all enquiries on BINX or HANK fasteners, Southco, Avdel , EJOT, BBA, Dejond or Gesipa fasteners, specifications or tools please contact us today : 0845 519 6066
Ejot PT screw distributor
18 Jan 2012
Hopwoods are busy taking pre orders for the ‘original’ Ejot PT Screw which joins in-house stock from mid January . As the UK’s preferred technical partner, Hopwoods are now considered to be the face of Ejot Industrial here in the UK.
“We are very pleased to have been selected by Ejot as the preferred UK distributor for their industrial product lines. As one of the UK’s leading specialist fastener distributors, we pride ourselves on being able to deliver multi-functional fastening solutions. The direct fixing solutions from Ejot, dramatically reduce in place fastener cost, save weight, and are excellent performers in vibration prone applications. Our considerable stock of the original Ejot PT screw, means that for the first time, this classic thread forming screw for plastics is readily available.” Fraser Hayden, Sales and Marketing Director.
The Ejot PT screw is the preferred application solution for many manufacturers requiring direct fixings into plastic, and is often a suitable replacement for brass inserts. It is extensively used in the instrumentation, domestic appliance and automotive industries due to material saving and cycle time reduction. The Ejot PT also provides considerable cost saving within the manufacturing process.
To find out more about the Ejot PT Screw and the full range of Ejot products available from Hopwood, talk to one of our team today on 0845 5196066, or email firstname.lastname@example.org to discuss your specific application.
Happy New Year from Roy Hopwood
17 Dec 2011
Taking advantage of our new ‘blog’ feature, we’d like to take the opportunity to wish all our customers a Happy New Year! Keep coming back to our news section for updates on everything that’s happening at Roy Hopwood. And don’t forget to take a look at our Latest Products to find out more about our industrial fastener products.